|
C a s e G o o d s
furniture
collections
wood
finishes
hardware
product specifications
manufacturing services
custom product
_____________________
S
e a t i n G
_____________________
F
a b r i c s
 |
A. General
Construction
-
Case
goods are manufactured with hardwood plywoods, with hardwood solid edges.
-
All
exposed edges are finished with solid wood.
-
All
gables, vertical surfaces, end panels, and kicks are plywood hardwood with
solid wood edges
-
Joints
are mortised and tenoned, doweled or blocked, glued and pinned, following
commercial construction standards.
-
All case
table and chair joints are glued with approved PVA assembly adhesive that
conforms to the ASTM D-905-89 test requirements of average block shear
strength of not less than 2800lbs per square inch.
-
All
corner blocks and braces are made of plywood.
-
All
structural members are glued and screwed, or stapled, in place.
-
All
excess glue is cleaned from surfaces exposed during normal use.
-
Tops are
surfaced with custom matched high-pressure laminate 0.030" thick, that
conforms to Federal Specifications LP508H. Laminate adhesives are PVA's. Top
cores are solid wood. Top edges are unbanded solid wood.
-
All end
panels are solid wood banded.
-
Back
panels are flush to back of case piece. Optional: back panels can be
recessed 3/4" to allow cases to fit over electrical plugs and cords.
Click here to view full details on furniture
construction in PDF format.
|
